Installation Guide

Configure network card

The steps for configuring a network connection can be seen in the image below.

Step 1 – make sure that « Connect automatically » is checked.

Step 2 – click the IPv4 Settings tab to access the IPv4 settings.

Step 3 – it is recommended to use a static IP address for your BLËSK server. Select Manual from the Method drop down menu.

Step 4 – click the « Add » button to add an IP address.

Step 5 – enter the information for the IP address, subnet mask, and default gateway.

Step 6 – add the DNS server information.

Step 7 – click « Apply » to finish.

install-guide-9

Suggest Edit