Mirroring

Enable Port Mirroring on Brocade

1 . Enable mirroring where the probe is connected to port 0/1/48 :

fgs (config)# mirror-port ethernet 0/1/48

2 . Configure ports that should be monitored (Ports 0/1/1 to 0/1/47 are to be monitored) :

fgs (config)# interface ethernet 0/1/1 to 0/1/47
fgs (config)# monitor both
Note The above commands will monitor both inbound and outbound traffics for interfaces 1 to 47.

Suggest Edit