Mirroring

Enable Port Mirroring on HP

1 . For example, to assign port 2 as the monitoring port (Port receiving monitored traffic) :

hp (config)# mirror-port ethernet 2

2 . Configure ports that should be monitored (Ports 10 to 24 are to be monitored) :

hp (config)# interface ethernet 10-24 monitor
Note The above commands will monitor traffics for interfaces 10 to 24 on the HP switch.

3 . If you assign port 2 as the monitoring port and configure the switch to monitor ports 10 – 24, show monitor displays the following :

hp (config)# show monitor
Network Monitoring Port

Mirror Port: 2
Monitoring sources
------------------
10 – 24
Suggest Edit