Reading Time: < 1 minute
The steps for configuring a network connection can be seen in the image below.
Step 1 – make sure that « Connect automatically » is checked.
Step 2 – click the IPv4 Settings tab to access the IPv4 settings.
Step 3 – it is recommended to use a static IP address for your BLËSK server. Select Manual from the Method drop down menu.
Step 4 – click the « Add » button to add an IP address.
Step 5 – enter the information for the IP address, subnet mask, and default gateway.
Step 6 – add the DNS server information.
Step 7 – click « Apply » to finish.
