This document explains how to configure network devices such as Switches, Routers, Firewalls or Server to allow and accept SNMP request from a Monitoring Server like blësk. Please take a note that commands as explained into this document may vary according to your device version and models.
Reading Time: < 1 minutes Use Telnet or SSH to connect to your switch, then enter the following commands to enable and configure SNMP. configure snmp-server location […]
Reading Time: 2 minutes To configure SNMP for the Nortel, access the SNMP menu by using the following command. /cfg/sys/adm/snmp 1 – Specifies the SNMP versions […]
Reading Time: 2 minutes Use Telnet or SSH to connect to your Switch, then enter the following commands to enable and configure SNMP. conf t snmp-server […]
Reading Time: < 1 minutes Use Telnet or SSH to connect to your switch, then enter the following commands to enable and configure SNMP. configure snmp-server location […]
