Network Performance Monitor

Reading Time: < 1 minute

The BLËSK NPM module requires the SNMP protocol, which should have already been defined and configured during the installation. The auto detection part of the software will handle all the jobs related to automatic importation, so there should be nothing for you to do except defining additional subnet(s) to scan if needed.

1. Go to Network Performance Monitor | Scan | LAN. Add any additional subnet you would like to auto detect and import into the « Subnet Range » box. Use commas to separate multiple entries (e.x 192.168.2.0/24,172.16.0.*). Wait one hour for the Scan to start since the default frequency is set to every 1 hour.

 

wpadmin
Author: wpadmin

You may also like

Network Security Monitor

Reading Time: 6 minutes NSM module only monitors what it sees from its own physical connection to the network, or what it is told by a […]

Network Configuration Manager

Reading Time: 2 minutes The BLËSK NCM module requires SSH or Telnet access with valid Username, Password or Enable Password to work. Those credentials should have […]

Asset Life Manager

Reading Time: 3 minutes One of the primary functions of ALM is to keep track of your hardware and software assets. These assets can be entered […]

Network Traffic Analyzer

Reading Time: 2 minutes The BLËSK NTA module is a sniffer program which, when correctly placed in your network, doesn’t need any additional configuration in order […]