Windows doesn’t come with a software to export system logs externaly. You have to find one from third party and install it to be able to have your syslogs sent to an external host like BLESK. Here is a page explaining how to install a free software provided by us and capable to do the job.
Reading Time: < 1 minute Use Telnet or SSH to connect to your Switch/Router, then enter the following commands to enable and configure system log messages to […]
Reading Time: < 1 minute Use Telnet or SSH to connect to your Firewall, then enter the following commands to enable and configure system log messages to […]
Reading Time: < 1 minute To configure syslog servers for the cluster, use the following command. /cfg/sys/syslog followed by: add x.x.x.x * x.x.x.x is the IP address […]
Reading Time: < 1 minute Use Telnet or SSH to connect to your switch, then enter the following commands to enable and configure system log messages to […]
