Reading Time: < 1 minute
NetFlow can be configured in Dashboard on the Network-wide > Configure > General page. NetFlow configuration settings are found under the Reporting header, with the following options :
1 . NetFlow traffic reporting
A drop-down menu to enable or disable NetFlow functionality
2 . NetFlow collector IP
This configuration option only appears if NetFlow traffic reporting is set to “Enabled: send netflow traffic statistics”
Used to configure the IPv4 address of the NetFlow collector
3 . NetFlow collector port
This configuration option only appears if NetFlow traffic reporting is set to “Enabled: send netflow traffic statistics”
Used to configured the UDP port that the NetFlow collector will be listening on. Use port 6343
