Apply your changes
Finally, we need to make sure that all the modifications we made are correct and have been applied on the server. To do this, go to “Tools”, “Control” and click the four buttons in order to write and apply all the information.
Be aware that you should always click them in this order:
1. Write monitoring data
2. Write additional data
3. Check configuration files
4. Restart APM
When you press the “Check configuration files” button, BLESK will verify if everything is ok. Never click the “Restart APM” button if you see that there are errors reported by the “Check configuration files” step.
You can now visit APM to see your new added passive host and associated passive services!
Thank you for reading.